2-Tier Electric Baby Bottle Sterilizer & Dryer – Steam Cleaning and 48-Hour Storage

$43.99 USD
Limit: 1 item per order

Steam · Dry · Store

Clean, dry bottles —
without the wait.

Load both tiers, press once. Steam at 212°F (100°C) reaches every bottle, nipple and pump part, warm air takes the moisture away, and clean storage keeps everything ready for up to 48 hours.

Two-tier bottle sterilizer and dryer loaded with six bottles, lid lifted
212°F steam
≈ 60 min cycle
  • 4 one-touch modes
  • Fits 6 bottles
  • Auto shutoff
212°F
Steam temp
≈60 min
Auto cycle
6 bottles
Full load
48 h
Clean storage

Why it earns its place

The nightly bottle routine, handled.

Washing is only half the job. This unit takes over the parts that eat your evening — the steam, the drying, and the keeping-clean-until-morning.

01

Steam that reaches everything

212°F (100°C) steam circulates through both tiers — bottle threads, nipple tips and pump parts included.

02

Warm air does the drying

Drying follows the steam automatically, so parts come out dry — no towel drying, no damp pieces on the counter.

03

Stays clean for 48 hours

Storage mode keeps warm air moving, so dried items stay dry and protected from dust between feeds.

04

Two tiers, six bottles

A full day of feeding in one load: up to 6 standard bottles, plus pacifiers and small accessories.

The auto cycle

One press runs the whole routine.

Auto pairs steam and drying into a single cycle of about 60 minutes. Nothing to time, nothing to move from one machine to another.

1
Steam
212°F (100°C) steam fills the chamber and works through both tiers.
2
Dry
Warm air takes over automatically and clears the moisture away.
3
Ready or stored
Use items now, or switch to storage for up to 48 hours of protection.
 
Steam circulating inside the chamber around bottles and small parts
 

Steam reaches the parts a sponge can’t.

Warm-air drying

No more wet bottles at 3 a.m.

What comes out is ready to fill — not something you have to pat dry first while a hungry baby waits.

Warm air circulating inside the drying chamber
 
 
 
Just washed
Dry & ready
 
1
Boil a pot
Watch the clock, wait for the water, fish hot parts out one by one.
2
Dry on a rack
Pieces sit out on the counter — still damp at the next feed.
3
Cover and hope
Dust and handling mean a rinse before anything gets used.
1
Load both tiers
Up to 6 bottles plus nipples and small parts, all at once.
2
Press Auto
Steam, then warm-air drying — about 60 minutes, unattended.
3
Leave it in storage
Up to 48 hours of warm-air protection, ready when you are.

Capacity & layouts

Two tiers. Six bottles. Three ways in.

A full day of feeding fits in one load. Tap a layout to see how the racks are arranged.

Three loading layouts for bottles, pacifiers and pump parts
 
Small parts up top
Nipple and collar tray in the upper tier, bottles standing in the lower tier.
Bottles only
Both tiers given over to bottles — handy when the day’s feedings are lined up.
Mixed load
Upper tray for nipples and collars, lower tier for bottles and pump parts together.
  • Up to 6 standard baby bottles per cycle
  • Upper tray for pacifiers, nipples and collars
  • Adjustable layouts for taller bottles and pump parts

48-hour storage

Clean now. Ready later.

Switch to storage after a cycle and the unit keeps warm air moving, so bottles stay dry and protected from dust — overnight, or through a full day out.

 
48
hours
Sterilizer holding bottles during storage mode

Four modes

Pick a mode. That’s it.

No digging through a manual at midnight — one panel, four clearly labelled choices. Tap a mode to see what it does.

Cycle preview
AUTOSTEAMDRYSTORAGE
≈ 60 minSteam onlyWarm airup to 48 h
 
Steam at 212°F (100°C), then warm-air drying — one press runs the full cycle of about 60 minutes. Stops after the high-temperature steam phase — useful when you plan to dry the parts your own way. Warm-air drying on its own, for parts you washed and rinsed by hand and just want dry. Keeps warm air moving so dried items stay dry and protected from dust for up to 48 hours.
Auto
Sterilize + Dry
Sterilize
Steam only
Dry
Warm air only
Storage
Up to 48 h
Control panel offering automatic, sterilize only, dry only and storage functions

One panel, four modes: Auto, Sterilize Only, Dry Only and Storage.

Safety

Built-in peace of mind.

Four protections run quietly in the background, so you can walk away and get on with your night.

Automatic shutoff
The cycle ends and power stops on its own.
Overheat protection
Heating cuts out if the unit gets too hot.
Boil-dry protection
Out of water? Heating stops automatically.
Low-water alert
Lets you know when it’s time to add water.

Care & cleaning

Easy to keep fresh.

01

Built-in high-efficiency filter

Helps keep the drying air clean while it works, so the air going in isn’t the weak link.

02

Removable racks & water tray

Lift them out, rinse, put them back — no awkward corners to reach into.

03

Use distilled water

Distilled water helps reduce mineral buildup. A periodic descale keeps performance steady over time.

Details

Everything at a glance.

Product typeElectric bottle sterilizer & dryer
Design2-tier
Steam temperature212°F / 100°C
Rated power36W
CapacityUp to 6 standard bottles
Loading layouts3 adjustable layouts
Automatic cycleApprox. 60 minutes
Storage functionUp to 48 hours
Operating modesAuto, Sterilize, Dry, Storage
Drying systemWarm-air drying
Air filtrationBuilt-in high-efficiency filter
Safety featuresAuto shutoff, overheat, boil-dry, low-water alert
Suitable itemsBottles, pacifiers, pump parts, small accessories
In the box
1 × 2-Tier Electric Bottle Sterilizer & Dryer

Good to know

Questions parents ask.

How long does a full cycle take?

About 60 minutes on Auto — the steam phase followed by warm-air drying.

What fits inside?

Up to 6 standard baby bottles, plus pacifiers and small pump parts, across two tiers and three adjustable layouts.

Does it dry the parts as well?

Yes. Warm air runs after the steam phase, and Dry Only can be used on its own for items you washed and rinsed by hand.

How long do items stay clean after a cycle?

Storage mode keeps warm air moving for up to 48 hours, so dried items stay dry and protected from dust between feeds.

What water should I use?

Distilled water is recommended to reduce mineral buildup. If you use tap water, descale periodically to keep performance steady.

Make the next feed the easy one.

Sterilize, dry and store — one press, about 60 minutes, up to 48 hours of clean storage.

Add to Cart
2-tier capacity
212°F steam
4 one-touch modes
Auto shutoff

Includes 1 × 2-Tier Electric Bottle Sterilizer & Dryer. Distilled water recommended.

Carrinho

Carregando