Wireless Rope Load Monitor – Real-Time Force Measurement Device

$39.99 USD
Limit: 1 item per order

Load monitoring · Rope systems

Know the load.
Not the guess.

A wireless load cell that sits in the rope system and streams live force readings to your phone. For rope access, rigging and rescue work where the number matters.

Wireless rope load monitor with red power ring, resting on stone
12 kN WLL
IP68
  • Wireless
  • 16 units / 1 app
  • Data logging
12 kN
Working load
60 kN
Breaking
IP68
Immersion rated
16
Units per device

What it changes

A reading instead of an estimate.

Rope systems are usually judged by feel. This puts a number on the screen while the system is under load.

01

Live load

Force readings update on compatible mobile devices while the system is working.

02

Shared view

Unlimited devices can watch the same unit — the whole team sees the same number.

03

Logged history

Record and review what the system actually saw, instead of relying on memory afterwards.

04

Fleet view

Monitor up to 16 units from one device — a full rig rather than a single point.

Live readout

Three loads, one screen.

Tap a scenario to see how the reading changes.

● LINKED
UNIT 01 / 12 kN WLL
0.82
2.40
11.60
kN
NORMAL
NORMAL
HIGH
 
0
3
6
12 kN
Routine working load: well inside the 12 kN limit, shown clearly enough to log without writing anything down.
A haul with a second person on the system. The reading climbs and the meter fills — still inside the working limit.
Approaching the working load limit. This is the point where a reading beats an estimate.

Illustrative values for demonstration. Always work within your system's rated limits and local procedures.

 

In the system

Clips in where the load runs.

Two attachment points, one in line with the rope, so it measures the force the system is actually carrying.

Two load monitors rigged between carabiners on a rope system at a rock face
  • In-line connection at both ends
  • Readings show on compatible mobile devices
  • Sealed against dust and water immersion

Set-up

Three steps to a reading.

01

Rig it in line

Connect the unit into the rope system so the load passes through it.

02

Power on and pair

Press the power ring and connect over wireless to a compatible device.

03

Work and record

Watch the live number, and keep the log for review after the job.

On the phone

The graph behind the number.

Peaks are easier to understand as a trace than as a single reading — which is what logging gives you.

Load monitor hanging in a rig while a phone displays a live load trace

More than one

Sixteen units, one screen.

On a multi-point rig, each unit reports back to the same device, and any number of devices can watch.

  • Monitor up to 16 units from one device
  • Share with unlimited mobile devices
  • Useful for training, where the whole team can follow

Side by side

Built to be rigged, not treated gently.

Sealed, compact, and designed to hang in the system while the work happens around it.

Three load monitors rigged in a row between carabiners

Details

Ratings at a glance.

Working load limit12 kN
Minimum breaking strength60 kN
Rope fit8–16 mm
ProtectionIP68
ConnectivityWireless
Units per deviceUp to 16
Data loggingYes
In the box
1 × Wireless Rope Load Monitor

Good to know

Before you rig it.

What load can it take?

A 12 kN working load limit and a 60 kN minimum breaking strength. Work within the WLL, not the breaking strength.

How do I see the readings?

Live values are shown on compatible mobile devices over a wireless connection.

Can several people watch at once?

Yes — data can be shared with unlimited mobile devices, and one device can monitor up to 16 units.

Does it record the data?

It logs load history so you can review a session afterwards, for training or analysis.

Is it weatherproof?

It is rated IP68 — dust-tight and protected against continuous water immersion.

What rope sizes fit?

It is intended for rope from 8 to 16 mm. Check your system and local procedures before use.

Rig it. Read it. Log it.

A number on the screen while the system is loaded — instead of a guess after it.

Add to Cart
12 kN WLL
60 kN MBS
IP68
Wireless

Includes 1 × Wireless Rope Load Monitor. Always follow local rigging procedures.

Carrello

Caricamento