-17.jpeg?w=2048&h=2048)
-22.jpeg?w=2048&h=2048)
-18.jpeg?w=2048&h=2048)
-13.jpeg?w=2048&h=2048)
-17.jpeg?w=2048&h=2048)
-17.jpeg?h=2048&q=80&w=2048)
-22.jpeg?h=2048&q=80&w=2048)
-18.jpeg?h=2048&q=80&w=2048)
-13.jpeg?h=2048&q=80&w=2048)
-17.jpeg?h=2048&q=80&w=2048)
A compact lifting wheel that raises heavy stage legs, truss and décor 27 mm off the ground onto an 80 mm swivel castor, so one person can move up to 130 kg of event gear smoothly.
Dragging, scraping and lifting stage legs by hand costs time, risks injury and damages floors. A lifting wheel changes all three.
Stage legs and truss are awkward to lift. One lever raises them 27 mm — one person moves the load.
Dragging legs marks stages and damages equipment. A non-marking castor rolls cleanly instead.
Every minute saved moving gear is a minute back in the show schedule. Fast in, fast out.
Raise equipment a controlled 27 mm off the ground, roll it on a fully swiveling castor, then lower it — the leg carries the full weight again.
The easy-to-use lever raises equipment a controlled 27 mm off the ground for effortless moving; lower it and stage legs carry the full weight again. Try the lift below.
Steel construction rated to move loads up to 130 kg, yet weighing under 3 kg — durable enough for pros, light enough to handle.
A fully rotating, non-marking wheel delivers precise control and smooth movement, even in tight spaces.
Works as a stage riser, truss mover and box riser — with optional attachments for mounting plates, truss and half couplers.
The smart lever-and-castor design keeps set-up and tear-down fast and fluid on stage.
Hot-dip galvanized and powder-coated finish resists wear, with minimal upkeep required over years of use.
Faster load-in, less gear damage, happier crews.
Reconfigure stages between acts in minutes.
Move truss and décor with one hand.
Fits standard Truss 30 systems for common stage and rigging builds.
80 × 138 × 276 mm — small enough to pack, strong enough for 130 kg.
Standard M10 bolts keep mounting simple and secure.
| Max Load | 130 kg (while moving) |
|---|---|
| Dimensions (W × D × H) | 80 × 138 × 276 mm |
| Lifting Height | Approx. 27 mm |
| Castor | 1 × 80 mm swivel castor, non-marking |
| Material | Steel |
| Weight | 2.94 kg |
| Finish | Hot-dip galvanized / powder coated (RAL 2008 orange) |
| Bolt Type | M10 |
| Truss Compatibility | Standard Truss 30 systems |
| Best For | Rental companies, event venues, production studios, stage/truss/décor moving |
Heavy gear, no heavy lifting — set-up and tear-down in half the effort.
Back To Top.jpeg?w=2048&h=2048){kind=logo}